Spreadsheet Woes – Limited Features For Easy Adoption of a Control Framework

Like it or not, regulations are here to stay and for a company to comply with them, its IT and financial systems will have to be equipped with a suitable control framework. One common stumbling block to such an implementation is a company?s over-reliance on spreadsheets.

Why is it so difficult to adopt controls for a system that’s reliant on spreadsheets? To understand this, let’s pinpoint some of the strongest, most powerful attributes of these User Developed Applications (UDA).

By nature, spreadsheets are the epitome of simplicity: easy to develop, easily accessible and easily altered. All computers in your workplace will most likely have them and everyone in your organization may be sharing them, making their own versions, and storing them in personal folders.

Sad to say though, these strengths are also control weaknesses and constitute the very reasons why spreadsheets require effective risk management.

Easy to develop. Being easy to develop, most spreadsheet systems are created by non-IT users who have limited knowledge on best control practices. Being constantly under time pressure, these ?developers? may also relegate documentation, security, and data verification to the back burner in favour of coming up with a timely report.

Easy to access. Information in a spreadsheet can be opened by practically anyone within the organization?s network. Who accessed what? And when? If anything goes wrong, it would be difficult to identify the culprit, and the failure to pinpoint responsibility for erroneous data could lead to bigger, more costly mistakes.

Easy to alter. Lastly, if the information is easy to access, then it can also be easily altered, consequently making reports more prone to both accidental errors and fraudulent modifications.

The rise of multimillion dollar scandals due to accidental and intentional spreadsheet errors have prompted regulatory bodies to publish guidelines for mitigating spreadsheet-associated risks. These controls include:

  • Change control
  • Version control
  • Access control
  • Input
  • Security and data integrity
  • Documentation
  • Development life cycle
  • Backup and archiving
  • Logic inspection/Testing
  • Segregation of duties/roles, and procedures
  • Analytics

In theory, these controls should be able to bring down risks considerably. However, because of the inherent nature of spreadsheets, such controls are rarely implemented effectively in the real world.

Take for example Security and Data Integrity. One of the most common causes of spreadsheet error is due to ?hardwiring?. This happens when values are inadvertently entered into a formula cell, naturally changing the logic of the spreadsheet.

As a way of control, cell locking can be applied on the formula cells to prevent users without the proper authority from making any changes. However, when reporting deadlines approach drawing spreadsheets to the forefront of data processing, more people are given access rights to the locked cells. Ironically, it is during these crunch times, when errors are most likely to happen.

Because the built-in features of a spreadsheet support none of the controls mentioned above, some companies are tempted to purchase control-enabling programs for spreadsheets just to continue using them for financial reporting. But although these programs can integrate the required controls, you?d still be interacting with the same complex and outdated interface: the spreadsheets.

Thus, these band-aid solutions may not suffice because the root cause of these problems are the spreadsheets themselves.

Learn more about our server application solutions and discover a better way to implement controls.

More Spreadsheet Blogs


Spreadsheet Risks in Banks


Top 10 Disadvantages of Spreadsheets


Disadvantages of Spreadsheets – obstacles to compliance in the Healthcare Industry


How Internal Auditors can win the War against Spreadsheet Fraud


Spreadsheet Reporting – No Room in your company in an age of Business Intelligence


Still looking for a Way to Consolidate Excel Spreadsheets?


Disadvantages of Spreadsheets


Spreadsheet woes – ill equipped for an Agile Business Environment


Spreadsheet Fraud


Spreadsheet Woes – Limited features for easy adoption of a control framework


Spreadsheet woes – Burden in SOX Compliance and other Regulations


Spreadsheet Risk Issues


Server Application Solutions – Don’t let Spreadsheets hold your Business back


Why Spreadsheets can send the pillars of Solvency II crashing down

Advert-Book-UK

amazon.co.uk

Advert-Book-USA

amazon.com

Check our similar posts

A Definitive List of the Business Benefits of Cloud Computing ? Part 4

Lowers cost of analytics

Big data and business intelligence (BI) have become the bywords in the current global economy. As consumers today browse, buy, communicate, use their gadgets, and interact on social networks, they leave in their trail a whole lot of data that can serve as a goldmine of information organisations can glean from. With such information at the disposal of or easily obtainable by businesses, you can expect that big data solutions will be at the forefront of these organisations’ efforts to create value for the customer and gain advantage over competitors.

Research firm Gartner’s latest survey of CIOs which included 2,300 respondents from 44 countries revealed that the three top priority investments for 2012 to 2015 as rated by the CIOs surveyed are Analytics and Business Intelligence, Mobile Technologies, and Cloud Computing. In addition, Gartner predicts that about $232 million in IT spending until 2016 will be driven by big data. This is a clear indication that the intelligent use of data is going to be a defining factor in most organisations.

Yet while big data offers a lot of growth opportunities for enterprises, there remains a big question on the capability of businesses to leverage on the available data. Do they have the means to deploy the required storage, computing resources, and analytical software needed to capture value from the rapidly increasing torrent of data?

Without the appropriate analytics and BI tools, raw data will remain as it is – a potential source of valuable information but always unutilised. Only when they can take the time, complexity and expense out of processing huge datasets obtained from customers, employees, consumers in general, and sensor-embedded products can businesses hope to fully harness the power of information.

So where does the cloud fit into all these?

Access to analytics and BI solutions have all too often been limited to large corporations, and within these organisations, a few business analysts and key executives. But that could quickly become a thing of the past because the cloud can now provide exactly what big data analytics requires – the ability to draw on large amounts of data and massive computing power – at a fraction of the cost and complexity these resources once entailed.

At their end, cloud service providers already deal with the storage, hardware, software, networking and security requirements needed for BI, with the resources available on an on-demand, pay-as-you-go approach. In doing so, they make analytics and access to relevant information simplified, and therefore more ubiquitous in the long run.

As the amount of data continues to grow exponentially on a daily basis, sophisticated analytics will be a priority IT technology across all industries, with organisations scrambling to find impactful insights from big data. Cloud-based services ensure that both small and large companies can benefit from the significantly reduced costs of BI solutions as well as the quick delivery of information, allowing for precise and insightful analytics as close to real time as possible.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
ISO Certification and Training

Overview

ISO, or the International Organisation for Standardisation, is a global standard-setting body, made up of a network of various standards organisations from among its 162 member-nations. ISO is a vital force in the manufacturing industry, promoting industrial and commercial global standards for specifications and requirements in materials, products, procedures, information, and quality management.

ISO Certification

For a company, an ISO Certification:

? Is an assurance that the organisation, has met the required management of processes and documentation.

? Provides standards on how businesses and organisations manage information and processes;

? Does not impose any regulations;

? Is not like a license that allows a business or company to operate.

Rather, an ISO Certification merely certifies that a management system, a manufacturing process, or an offered service has all the elements for quality assurance and the capability to compete in the international market.

That said however, an ISO Certification is still vital to most businesses because it brings them up to par with global standards. For instance, in many industries, contracting companies are required ISO 9001 certification, and some government contracts, such as in the oil industry or medical technologies, depend largely on ISO 9001 compliance. Most ISO Standards are specific to different industries, processes, and products, but ISO 9001 is a management system standard that can be applied to any company.

ISO 9001

ISO 9001 is unarguably, one of the most established Quality Management Systems program in the world today that can be a useful tool for any organisation. ISO 9001 Standards is currently the recognised standard not only for quality management systems, but management systems in general, ensuring quality in all aspects ? products, services, and documentation.

Any company, regardless of size or sector, aiming to improve its operations and management, would do well with an ISO 9001 Certification, especially if the organisation is prepared to implement the standards throughout the entire organisation and not just in particular departments or divisions.

Find out more about our Quality Assurance services in the following pages:

Total Quality Management

Failure Mode and Effects Analysis

Six Sigma

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
2015 ESOS Guidelines Chapter 2 – Deadlines and Status Changes

The ESOS process is deadline driven and meeting key dates is a non-negotiable. The penalties for not complying / providing false or misleading information are ?50,000 each. Simply not maintaining adequate records could cost you ?5,000. The carrot on the end of the stick is the financial benefits you stand to gain.

Qualifying for inclusion under the ESOS umbrella depends on the status of your company in terms of employee numbers, turnover and balance sheet on 31 December 2014. Regardless of whether you meet the 2014 threshold or not, you must reconsider your situation on 31 December 2018, 2022 and 2026.

Compliance Period Qualification Date Compliance Period Compliance Date
1 31 December 2014 From 17 July 2014* to 5 December 2015 5 December 2015
2 31 December 2018 From 6 December 2015 to 5 December 2019 5 December 2019
3 31 December 2022 From 6 December 2019 to 5 December 2023 5 December 2023
4 31 December 2026 From 6 December 2023 to 5 December 2027 5 December 2027

Notes:

1. The first compliance period begins on the date the regulations became effective

2. Energy audits from 6 December 2011 onward may go towards the first compliance report

Changes in Organisation Status

If your organisation status changes after a qualification date when you met compliance thresholds, you are still bound to complete your ESOS assessment for that compliance period. This is regardless of any change in size or structure. Your qualification status then remains in force until the next qualification date when you must reconsider it.

Ready to work with Denizon?

Contact Us Today