FUJIFILM Cracks the Energy Code

FUJIFILM was in trouble at its Dayton, Tennessee plant in 2008 where it produced a variety of speciality chemicals for industrial use. Compressed-air breakdowns were having knock-on effects. The company decided it was time to measure what was happening and solve the problem. It hoped to improve reliability, cut down maintenance, and eliminate relying on nitrogen for back-up (unless the materials were flammable).

The company tentatively identified three root causes. These were (a) insufficient system knowledge within maintenance, (b) weak spare part supply chain, and (c) generic imbalances including overstated demand and underutilised supply. The maintenance manager asked the U.S. Department of Energy to assist with a comprehensive audit of the compressed air system.

The team began on the demand side by attaching flow meters to each of several compressors for five days. They noticed that – while the equipment was set to deliver 120 psi actual delivery was 75% of this or less. They found that demand was cyclical depending on the production phase. Most importantly, they determined that only one compressor would be necessary once they eliminated the leaks in the system and upgraded short-term storage capacity.

The project team formulated a three-stage plan. Their first step would be to increase storage capacity to accommodate peak demand; the second would be to fix the leaks, and the third to source a larger compressor and associated gear from a sister plant the parent company was phasing out. Viewed overall, this provided four specific goals.

  • Improve reliability with greater redundancy
  • Bring down system maintenance costs
  • Cut down plant energy consumption
  • Eliminate nitrogen as a fall-back resource

They reconfigured the equipment in terms of lowest practical maintenance cost, and moved the redundant compressors to stations where they could easily couple as back-ups. Then they implemented an online leak detection and repair program. Finally, they set the replacement compressor to 98 psi, after they determined this delivered the optimum balance between productivity and operating cost.

Since 2008, FUJIFILM has saved 1.2 million kilowatt hours of energy while virtually eliminating compressor system breakdowns. The single compressor is operating at relatively low pressure with attendant benefits to other equipment. It is worth noting that the key to the door was measuring compressed air flow at various points in the system.

ecoVaro specialises in analysing data like this on any energy type.?

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

How FieldElite helps Electricians

The need to hire an electrician arises more often than we expect. It’s quite common to come across problems with structure-wiring, whether at home or in your business premises. It’s, therefore, not surprising to come across a home or a business owner in search of electrical services.

Whether a startup or a fully-fledged business that offers electrical services, there are challenges that come with running the venture. Where you have field service electricians, the challenges are even compounded, more so on matters of assigning tasks, receiving complaints from customers, and receiving field service reports.

As we all know, an electrical business isn’t just limited to the management of field service electricians. You’ll have to manage all the processes, a responsibility that can be quite daunting.

It doesn’t have to be difficult, though. You can take advantage of a field service management software program to make the entire management process effortless.

FieldElite is one such software. With FieldElite, you can assign tasks, communicate, and receive reports from your electricians on the go. Incorporating field service management in your electrical business enables you to run your business operations smoothly. 

Below are some of the benefits of using FieldElite field service management software. 

Increased Efficiency

Improved efficiency is the number one benefit electricians can get from field service management software. With FieldElite, electricians can accept jobs while in the field and add attachments together with client signatures using their smartphones or tablets. From the field management software, they can get information on the optimal route to the site, the tools required for the job, the service history of the customer, and contractual commitments.

Managing and scheduling tasks on FieldElite are just a few clicks away for office-based operators. That means reduced travel times and delays that often cripple workforce management.

Improved Professionalism

FieldElite field management software gives you a professional edge over your competitors. With this field management software, you can store all your business-related information in a central place. Therefore, each of your electricians can access the data from anywhere using their smartphone or tablet installed with the FieldElite mobile application. As such, there?s no breach in communication, and that means the electricians will get the scheduled tasks on time. Building such relationships with your team in the field encourages teamwork and motivates each team member to play their part. Again, since you can monitor what’s going on in the field, you can address the issues raised by your electricians or customers as soon as possible. 

Effective Communication

Timely communication is very essential if you’re working with field technicians. Since you’ll not always be with them in the field, it’s always important to establish a proper communication channel to ensure information reaches them in time. With FieldElite field service management software, electricians receive notifications and details about tasks assigned to them via the FieldElite mobile app.

On the other hand, office-based staff can access the report with the details of the job once the electrician completes the given task. This implies that both the electricians and the office-based operators can get communication instantly, enabling them to see and manage their workloads. Individual electricians can close jobs on-site and proceed to the next task without having to do paperwork reporting. For this reason, electricians can complete multiple tasks within a short time, which improves their overall productivity.

High Accuracy

With FieldElite field service management software, missing data or incomplete information is a thing of the past. Electricians no longer have to deal with paperwork, which can be daunting and time-consuming, yet with a million and one errors. With FieldElite advanced mobile features, all field service processes and operations are automated. The electricians are left with quite little to do, and that minimises data entry errors.

Because the managers get real-time updates from the field techs, they can accurately maintain and track the field processes. With FieldElite mobile features, managers can get information regarding the job status, the actual time of arrival, and the time taken to complete the task. With such updates, the electricians are better placed to do the job well without wasting much time, thus improving their overall productivity. 

Improved Co-ordination With The Team 

Apart from improving the productivity of the electricians, FieldElite improves coordination with the entire management team. For instance, an electrician can be assigned new tasks within the same area where they’re currently assigned instead of sending another to complete a task in that same place. FieldElite makes this possible by always capturing the current location and job status.

Whenever a new request is made in an area, FieldElite first checks the database to confirm if there is an electrician already assigned in that area. If the status of the ongoing assignment is complete or almost complete and the new task request can wait for the remaining time, the electrician in the field would be assigned the new task. By doing so, the business saves on cost and time and minimises movements. 

Improved Customer Satisfaction

As an electrician, you’ll only be satisfied if the service you offer makes the customer happy. Apart from fixing their wiring problems, they?d be happy if you responded quickly to their request. This is only made possible with field service management software. With FieldElite, managers can notify the electricians on the service requests in their respective areas, allowing them to respond to the call within a very short time. Not only does this give you some level of satisfaction as the business owner but it’s also a win for the company. 

Make your field work-flow better with FieldElite, and improve the productivity of your electricians. With FieldElite releasing regular and timely updates, users aren’t left behind whenever there are changes in the field service industry. The updates introduce new features and capture new standards to ensure that you get the best experience with the software at all times.

8 Reasons why you Need to Undertake Technical and Application Assessments

Are your information assets enabling you to operate more cost-effectively or are they just drawing in more risks than you are actually aware of? Obviously, you now need to get a better picture of those assets to see if your IT investments are giving you the benefits you were expecting and to help you identify areas where improvements should be made.

The best way to get the answers to those questions is through technical and application assessments. In this post, we?ll identify 8 good reasons why it is now imperative to undertake such assessments.

1. Address known issues – Perhaps the most common reason that drives companies to undertake a technology/application assessment is to identify the causes of existing issues such as those related to data accessibility, hardware and software scalability, and performance.

2. Cut down liabilities and risks – Unless you know what and where the risks are, there is no way you can implement an appropriate risk mitigation strategy. A technology and application assessment will enable you to thoroughly test and examine your information systems to see where your business-critical areas and points of failure are and subsequently allow you to act on them.

3. Discover emerging risks – Some risks may not yet be as threatening as others. But it would certainly be reassuring to be aware if any exist. That way, you can either nip them in the bud or keep them monitored.

4. Comply with regulations – Regulations like SOX require you to establish adequate internal controls to achieve compliance. Other regulations call for the protection of personally identifiable information. Assessments will help you pinpoint processes that lack controls, identify data that need protection, and areas that don’t meet regulatory requirements. This will enable you to act accordingly and keep your company away from tedious, time-consuming and costly sanctions.

5. Enhance performance – Poor performance is not always caused by an ageing hardware or an overloaded infrastructure. Sometimes, the culprits are: unsuitable configuration settings, inappropriate security policies, or misplaced business logic. A well-executed assessment can provide enough information that would lead to a more cost-effective action plan and help you avoid an expensive but useless purchase.

6. Improve interoperability – Disparate technologies working completely separate from each other may be preventing you from realising the maximum potential of your entire IT ecosystem. If you can examine your IT systems, you may be able to discover ways to make them interoperate and in turn harness untapped capabilities of already existing assets.

7. Ensure alignment of IT with business goals – An important factor in achieving IT governance is the proper alignment of IT with business goals. IT processes need to be assessed regularly to ensure that this alignment continues to exist. If it does not, then necessary adjustments can be made.

8. Provide assurance to customers and investors – Escalating cases of data breaches and identity theft are making customers and investors more conscious with a company?s capability of preserving the confidentiality of sensitive information. By conducting regular assessments, you can show your customers and investors concrete steps for keeping sensitive information confidential.

8 Best Practices To Reduce Technical Debt

When past actions in software development return to haunt you…

Is your business being bogged down by technical debt? Let’s look at measures that you can take to reduce it and scale your operations without the weight pulling you back. 

 

Work with a flexible architecture.

Right from the word go, you want to use architecture whose design is malleable, especially with the rapid rate of software evolution witnessed today. Going with an architecture that keeps calling for too much refactoring, or whose design won’t accommodate future changes will leave you with costly technical debt. Use scalable architecture that allows you to modify or add new features in future releases. While on this, complex features required in the final product should be discussed at the planning stage, that way simplified solutions that will be easier to implement can be identified, as this will lead to less technical debt in the long run. 

 

The Deal with Refactoring 

This is basically cleaning up the code structure without changing its behaviour. With the updates, patches, and new functionalities that are added to the systems and applications, each change comes with the threat of more technical debt. Additionally, organisations are increasingly moving their IT infrastructure from on-premises facilities to colocation data centres and deploying them on the cloud. In such scenarios, some workarounds are often needed to enable the systems to function in the new environments, which they hadn’t been initially developed to accommodate. Here, you will need to take some time to refactor the existing system regularly, streamlining the code and optimizing its performance – and this will be key to pay down the tech debt. When working with a flexible architecture from the start, the amount of work that goes into this will be reduced, meaning there’ll be less tech debt involved. 

 

Run discovery tests

Discovery testing essentially takes place even before a line of code is written for the system or application. This takes place at the product definition stage, where human insight software is used to understand the needs of the customer and is particularly helpful in setting priorities for the development work that will be carried out. It gives your business the opportunity to minimize the technical debt by allowing customers to give you a roadmap of the most pertinent features desired from the product. 

 

Routine code review

Getting a fresh look at the product or application from different sets of eyes in the development team will improve the quality of the code, thus reducing technical debt. There’s a catch though – this should be planned in a convenient way that doesn’t end up becoming a burden for the developers. Here are suggestions:

● Break down pull requests

Instead of having complex pull requests where numerous changes in the code are introduced at a go, have this broken down into smaller manageable pull requests, each with a brief title and description about it. This will be easier for the code reviewer to analyse. 

● Define preferred coding practices

Documenting the preferred coding style will result in cleaner code, meaning the developers will focus their effort on reviewing the code itself, not losing time on code format debates.

 

Test automation

Relying only on scheduled manual testing opens you up to the risk of technical debt accruing rapidly, and not having sufficient resources to deal with the accumulated problems when they are identified. Automated testing on the other hand enables issues to be uncovered quicker, and with more precision. For instance, you can have automated unit tests that look at the functioning of the individual components of a system, or regression testing where the focus is on whether the code changes that have been implemented have affected related components of the system. However, establishing and maintaining automated testing will require quite some effort – making it more feasible for the long-term projects.

 

Keep a repository that tracks changes made

Do you have a record of changes made in the software? Keeping one in a repository that is accessible by the development team will make it easy to pin-point problems at their source. For instance, when software is being migrated to a new environment, or legacy software is in the process of being modernised, you will want to have an accurate record of changes that are being introduced, that way if there is an undesired impact on the system this it will be easier to zero-down on the cause.

 

Bring non-technical stakeholders on board

Does this conversation sound familiar?

Development Team: “We need to refactor the messy code quickly”

Product Team: “We have no idea what you are saying”

On one hand, you have the management or product team defining the product requirements, creating a project roadmap, and setting its milestones. On the other hand, there’s the software development/engineering that’s primarily focused on the product functionality, technical operations and clearing the backlog in code fixes. Poor communication between the two teams is actually a leading cause of technical debt.

For you to take concrete steps in managing your technical debt, the decision-makers in the organisation should understand its significance, and the necessity of reducing it. Explain to them how the debt occurred and why steps need to be taken to pay it down – but you can’t just bombard them with tech phrases and expect them to follow your thought process. 

So how do you go about it? Reframe the issues involved with the technical debt and explain the business value or impact of the code changes. Basically, the development team should approach it from a business point of view, and educate the management or production team about the cost of the technical debt. This can include aspects such as expenses in changing the code, salaries for the software engineers especially when the development team will need to be increased due to the workload piling up, as well as the revenue that is lost when the technical debt is allowed to spiral. 

The goal here is to show the management or production team how issues like failing to properly define the product requirements will slow down future software development, or how rushing the code will affect the next releases. That way, there will be better collaboration between the teams involved in the project. 

 

Allocate time and resources specifically for reducing technical debt

With management understanding that working with low-quality code is just like incurring financial debt and it will slow down product development, insist on setting time to deal with the debt. 

For instance, when it comes to the timing of application releases, meetings can be conducted to review short- and longer-term priorities. These meetings – where the development team and product team or management are brought together, the developers point out the software issues that should be resolved as a priority as they may create more technical debt. Management then ensures that budgets and plans are put in place to explicitly deal with those ongoing maintenance costs.

 

Retire old platforms

While most of the resources are going into developing new applications and improving the systems being used, the organisation should also focus on retiring the old applications, libraries, platforms, and the code modules. It’s recommended that you factor this into the application release plans, complete with the dates, processes and costs for the systems involved. 

 

Total overhaul

When the cost and effort of dealing with the technical debt far outweighs the benefits, then you may have to replace the entire system. At this tipping point, you’re not getting value from the technical debt, and it has become a painful issue that’s causing your organisation lots of difficulties. For instance, you may be dealing with legacy software where fixing it to support future developments has simply become too complicated. The patches available may only resolve specific issues with the system, and still leave you with lots of technical debt. Here, the best way out is to replace the system in its entirety. 

 

Final thoughts

Every software company has some level of tech debt. Just like financial debt, it is useful when properly managed, and a problem when ignored or allowed to spiral out of control. It’s a tradeoff between design/development actions and business goals. By taking measures to pay down your organization’s debt and address its interest as it accrues, you will avoid situations where short term solutions undermine your long-term goals. This is also key to enable your business to transition to using complex IT solutions easier, and even make the migration between data centres much smoother. These 8 measures will enable you to manage your technical debt better to prevent it from being the bottleneck that stifles your growth.

Ready to work with Denizon?

Contact Us Today