ecoVaro to tackle water stress

For many people within the UK, water is not really something to worry about. Surely enough of it falls out the sky throughout the year that it does feel highly unlikely that we?ll ever run out of it. There certainly does seem to be an abundance of Branded Water available in plastic bottles on our supermarket shelves.

Water, water, every where,
And all the boards did shrink;
Water, water, every where,
Nor any drop to drink.

The Rime of the Ancient Mariner ? Samuel Taylor Coleridge

Despite this, Once-unthinkable water crises are becoming commonplace.  If you consider that In England and Wales, we use 16 billion litres of clean drinking water every day ? that’s equivalent to 6,400 Olympic sized swimming pools.

Currently, water companies can provide slightly more than we need ? 2 billion litres are available above and beyond what we’re using.  In some areas, though, such as south east England, there is no surplus and, as such, these regions are more likely to face supply restrictions in a dry year.

If we take little moment to reflect on some of the most notable water related stories over the past few years, we’ll start to get a picture of just how real the potential and the threat of water shortages can be.

Reservoirs in Chennai, India?s sixth-largest city, are nearly dry right now. Last year, residents of Cape Town, South Africa narrowly avoided their own Day Zero water shut-off.

It was only year before that, Rome rationed water to conserve scarce resources.

Climate change is likely to mean higher temperatures which may drive up the demand for water (alongside population growth) and increase evaporation from reservoirs and water courses during spring and summer.

The impact of climate change on total rainfall is uncertain, but the rain that does fall is likely to arrive in heavier bursts in winter and summer. Heavier rain tends to flow off land more quickly into rivers and out to sea, rather than recharging groundwater aquifers.

A greater chance of prolonged dry periods is also conceivable.  This combined with the harsh reality that no human population can sustain itself without sufficient access to fresh water.

If present conditions continue, 2 out of 3 people on Earth will live within a water-stressed zone by 2025

What is water stress?

Water stress is a term used to describe situation when demand for water is greater than the amount of water available at a certain period in time, and also when water is of poor quality and this restricts its usage. Water stress means deterioration in both the quantity of available water and the quality of available water due to factors affecting available water.

Water stress refers to the ability, or lack thereof, to meet human and ecological demand for water. Compared to scarcity, water stress is a more inclusive and broader concept.

Water Stress considers several physical aspects related to water resources, including water scarcity, but also water quality, environmental flows, and the accessibility of water.

Supply and Demand

Major factors involved when water scarcity strikes is when a growing populations demand for water exceeds the areas ability to service that need.

Increased food production and development programs also lead to increased demand for water, which ultimately leads to water stress.

Increased need for agricultural irrigation in order to produce more crops or sustain livestock are major contributors to localised water stress.

Overconsumption

The demand for water in a given population is fairly unpredictable.  Primarily, based on the fact that you can never accurately predict human behaviour and changes in climate.

If too many people are consuming more water than they need because they mistakenly believe that water is freely available and plentiful, then water stress could eventually occur.

This is also linked to perceived economic prosperity of a give region.  Manufacturing demand for water can have huge impact regardless whether water is actively used within the manufacturing process or not.

Water Quality

Water quality in any given area is never static.  Water stress could happen as a result of rising pollution levels having a direct impact on water quality.

Water contamination happens when new industries either knowingly or unknowingly contaminate water with their industrial practices.

Largely, this can happen and frequently does so because these industries do not take effective control of monitoring and managing their impact on communal water supplies.  Incorrectly assuming this is the responsibility of an additional third party like the regional water company.

The truth is, water quality and careful monitoring of it is all of our responsibility.

Water Scarcity

Simple increases in demand for water can in itself contribute to water scarcity. However,  these are often preceded by other factors like poverty or just the natural scarcity of water in the area.

In many instances, the initial locations of towns or cities were not influenced by the close proximity of natural resources like water, but rather in pursuit of the extraction of other resources like Gold, Coal or Diamonds.

For Instance, Johannesburg,  South Africa is the largest City in South Africa and is one of the 50 largest urban areas in the world. It is also located in the mineral rich Witwatersrand range of hills and is the centre of large-scale gold and diamond trade.

Johannesburg is also one of the only major cities of the world that was not built on a river or harbour.   However, it does have streams that contribute to two of Southern Africas mightiest rivers – Limpopo and the Orange rivers.  However, most of the springs from which many of these streams emanate are now covered in concrete!

Water Stress and Agriculture

Peter Buss, co-founder of Sentek Technology calls ground moisture a water bank and manufactures ground sensors to interrogate it. His hometown of Adelaide is in one of the driest states in Australia. This makes monitoring soil water even more critical, if agriculture is to continue. Sentek has been helping farmers deliver optimum amounts of water since 1992.

The analogy of a water bank is interesting. Agriculturists must ?bank? water for less-than-rainy days instead of squeezing the last drop. They need a stream of real-time data and utilize cloud-based storage and processing power to curate it.

Sentek?s technology can be found in remote places like Peru?s Atacamba desert and the mountains of Mongolia, where it supports sustainable floriculture, forestry, horticulture, pastures, row crops and viticulture through precise delivery of scarce water.

This relies on precision measurement using a variety of drill and drop probes with sensors fixed at 4? / 10cm increments along multiples of 12? / 30cm up to 4 times. These probe soil moisture, soil temperature and soil salinity, and are readily repositioned to other locations as crops rotate.

Peter Buss is convinced that measurement is a means to an end and only the beginning. ?Too often, growers start watering when plants don’t really need it, wasting water, energy, and labour. By accurately monitoring water can be saved until when the plant really needs it.

Peter also emphasises that crop is the ultimate sensor, and that ?we should ask the plant what it needs?.

This takes the debate a stage further. Water wise farmers should plant water-wise crops, not try to close the stable door after the horse has bolted and dry years return.

The South Australia government thinks the answer also lies in correct farm dam management. It wants farmers to build ones that allow sufficient water to bypass in order to sustain the natural environment too.

There is more to water management than squeezing the last drop. Soil moisture goes beyond measuring for profit. It is about farming sustainably using data from sensors to guide us.

Ecovaro is ahead of the curve as we explore imaginative ways to exploit the data these provide for the common good of all.

A Quarter of the World?s Population, Face High Water Stress

Data from WRI?s Aqueduct tools reveal that 17 countries ? home to one-quarter of the world?s population?face ?extremely high? levels of baseline water stress, where irrigated agriculture, industries and municipalities withdraw more than 80% of their available supply on average every year. 

Water stress poses serious threats to human lives, livelihoods and business stability. It’s poised to worsen unless countries act: Population growth, socioeconomic development and urbanization are increasing water demands, while climate change can make precipitation and demand more variable.  

How to manage water stress

Water stress is just one dimension of water security. However, like any challenge, its outlook depends on adequate monitoring and management of environmental data.

Even countries with relatively high water stress have effectively secured their water supplies through proper management by leveraging the knowledge they have garnered by learning from the data they gathered.

3 ways to help reduce water stress

In any geography, water stress can be reduced by measures ranging from common sense to innovative technology solutions.

There are countless solutions, but here are three of the most straightforward:

1. Increase agricultural efficiency: The world needs to make every drop of water go further in its food systems. Farmers can use seeds that require less water and improve their irrigation techniques by using precision watering rather than flooding their fields.

Businesses need to increase investments to improve water productivity, while engineers develop technologies that improve efficiency in agriculture.

Consumers can reduce food loss and waste, which uses one-quarter of all agricultural water.

2. Invest in grey and green infrastructure:  D Data produced by Aqueduct Alliance  –  shows that water stress can vary tremendously over the year.  WRI and the World Bank?s research shows that built infrastructure (like pipes and treatment plants) and green infrastructure (like wetlands and healthy watersheds) can work in tandem to tackle issues of both water supply and water quality.

3. Treat, reuse and recycle:  We need to stop thinking of wastewater as waste.

Treating and reusing it creates a ?new? water source.

There are also useful resources in wastewater that can be harvested to help lower water treatment costs. For example, plants in Xiangyang, China and Washington, D.C. reuse or sell the energy- and nutrient-rich byproducts captured during wastewater treatment.

Summary

The data is undeniably clear, there are very worrying trends in water.

Businesses and other other organisations need to start taking action now and investing in better monitoring and management, we can solve water issues for the good of people, economies and the planet. We collectively cannot kick this can down the road any further, or assume that this problem will be solved by others.

It is time, for a collective sense of responsibility and for everyone to invest in future prosperity of our Planet as a collective whole.  Ecological preservation should be at the forefront of all business plans because at the end of the day profit is meaningless without an environment to enjoy it in!

Check our similar posts

Key Steps to Complying with ESOS

Energy Savings Opportunity Scheme has already been launched. In fact, it is by now in its initial phase. However, many businesses are still not aware of the new scheme, especially those who are covered by the qualifications for ESOS. To help them understand what they need to do in compliance to the energy efficiency strategy, here are key steps they can follow along the way.

Measure Overall Energy Consumption

The first step to complying with ESOS is to make an initial estimate of the business? energy consumption. This includes measuring the use of electricity, renewable energy, combustible fuels and all other forms of energy consumed whether in buildings, transports and industrial processes.

Three important factors to consider are the measurement units used, the reference period and quality of data. Energy units, such as MWh and GJ, or energy expenditure costs should be applied. Business enterprises should also do the initial measurement within a reference period of 12 months. Moreover, data collected should be verifiable at hand.

Identify Areas of Significant Energy Consumption

When the total energy consumption for all the activities and assets has already been estimated, it’s then time to identify what areas in the organisation comprise the significant portion of the overall energy usage. The areas recognised should cover at least 90% of the overall consumption. Meaning to say, ESOS participants have the chance to omit 10% of the energy consumption and instead focus on the 90%. This would ensure that subsequent energy audits will be cost-effective and proportionate.

Consider and Choose Compliance Routes

In order to comply with ESOS, qualified businesses should consider what compliance routes to take. These routes include taking series of energy audits, operating and implementing a certified ISO 50001 energy management system, acquiring Display Energy Certificates (DECs) and working with Green Deal assessments. Whichever route the business takes, one should maintain credible evidences, along with helpful documents, to certify their compliance.

Report the Compliance

Except when the large enterprise covers all the significant areas of energy consumption by means of ISO 50001 certification, one should appoint a lead assessor to supervise, conduct and review the organisation’s chosen ESOS compliance route. In this case, the approved assessments should then be signed off at board level to ensure that the conclusions and recommendations for energy savings are properly carried. To confirm their compliance, the business should submit a formal notification to the Environment Agency.

Because ESOS is not just an opportunity but also an obligation, it designated compliance bodies and gave them the authority to file civil penalties towards those who fail to comply with the scheme. Not only that, these appropriate authorities have the right to publish information about non-compliant enterprises including their name, details of non-compliance and corresponding penalty amount. Among these UK compliance bodies are Natural Resources Wales, Environment Agency in England, The Scottish Environment Protection Agency (SEPA) and Northern Ireland Environment Agency.

So, if you are covered with the ESOS qualifications, make sure to be informed. As the famous saying goes, ?Ignorance of the law excuses no one.? Likewise, awareness of ESOS is a responsibility every large business in UK should give importance to.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
How to carry out an Operational Review

A mobile workforce management software is key to managing an efficient field workforce.? Managing a staff of people can be tricky in any industry. Try keeping track of employees on shifting jobsites, many whom are paid hourly or temporary workers. The added pressure of ensuring the right workers get to the right sites at the right times, but they also need to track hours, parts used, vehicles and equipment assets.

In a previous post, we defined what is an operational review and why they play a key process in the continual evolution of successful businesses.?

Operational reviews allow the organization members to evaluate their performance, according to the procedures, resources properly, timescales and budgets.

Denizon – Operational Reviews Defined

Tweet

In this post, we’ll take a closer look at how to implement an operational review and the steps typically undertaken to help you and your organisation to implement an operational review.

What the steps in a Operational Review Process

There are typically six steps in an operational review that range from preparatory work conducting interviews and collecting documents to the presentation of the final written report.

An audit should be customized to meet a organisatons specific needs, so standard steps can and should only serve as a guideline.? Management and internal and external auditors should adjust the process to address the company’s particular goals and objectives.

Initial Management Meeting

Understanding the problem is the first crucial step of an operational review. This is one of major areas of discussions when the audit team meets with the management, and department heads will be asked to identify any specific areas of concern. Once the problem is identified, it would be easier to come up with workable solutions.

Conduct Interviews

The next step in the evaluation is carried out with experienced teams doing interviews and keeping close observation. Each team essentially watches how employees carry out their responsibilities. This is considered a key part of the process.

When doing the interview, it is also vital that the observing team gains the employees? trust and confidence. Likewise, the staff must be assured that whatever transpires between the team and the employee will be kept confidential. Management must therefore guarantee anonymity to anyone who offers critical information, lest employees withhold vital information and render the data gathered inaccurate.

Systems Review

Employees and management practices will be reviewed by the assessing team according to the standard policies and guidelines of the company. The effectiveness of the controls in place as well as their appropriateness to the current operating conditions will also be evaluated.

Reporting

A documentation of the data gathered and the assessment of the evaluating team, will be submitted to the management after the review process. Flow charts and written narratives of departmental activities are usually part of this report. This is also where observations and recommendations of the team will be presented to the department heads concerned.

Review Results

While the operational review is being conducted, it is important to take into account the vital factors that affect the company: the people, processes, procedures, and strategies. These four factors can determine the company?s progress in the future.

Key Areas of focus in operation reviews

At a minimum an operational review should include the following key ares of assessment

Management Control

Responsibilities, authority, and the scope in which an employee has the freedom to act must be clearly defined and documented. A complete and specific job description for instance, would give the employee a clear perspective on how he acts and functions within the company.

Boundaries should be set not only to benefit the employer but more so the employee as well.

Moral and Ethical Guidelines

Moral and ethical guidelines are just as important to ensure for a smoother employer?employee relationship. Otherwise, personal issues such as work ethics, work attitude and personal values may post problems in the long run if such guidelines are not drawn properly before relationships are established.

Processes and procedures

Evaluating processes is only beneficial if the company itself updates its processes and procedural manuals regularly, or at least when needed. Such protocols may need revision and some steps may be obsolete already. Improving a company?s processes and procedures doesn’t always entail cost. In fact, improvised procedures may even be cost-effective and could make the processes more manageable.

Communication and reporting standards

Gaps in communication could result in serious lapses in internal controls, putting the company and/or its assets at risk. This is where the importance of timely and clear communication comes in. Likewise, reports must be useful, and the flow of information and how it is processed must keep pace with the company?s growth.

Information technology (IT) and security controls can also be included under the communication clause. Proper IT security policies must be in place, state-of-the-art protection techniques employed, and everything be documented, periodically updated, and continually monitored.

Strategic planning and tactics

No company can ever be complete without its strategies. It would unwise for any organization to proceed without first knowing where it stands and what direction it wants to take. Strategic planning draws such a map. It must be aligned to the mission and vision of the company, and should also coincide with the organizational goals set. Strategic planning deals with these three key questions:

  • What do we do now
  • Whom do we do it for?
  • How can we overcome competition

Without clear strategic direction, expectations would likely differ between ownership and management.

Contingency planning, testing and recovery

Contingency plans must be up-to-date, and are essential to the organization. If one course of action fails, the company should have plan B, C and so on. In addition, an organization should be prepared to respond to interference’s.

This includes establishing a formal process to review transactions processing during both disruption and recovery.

Presentation of Report

Based on your objectives and our findings, we will develop detailed recommendations to improve your company?s performance and productivity. Our written report will include a list of both short-term and long-term projected improvements and courses of action, to be mutually agreed upon by both parties.

To ensure the achievement of the improvements we outlined, our team will also assist in the implementation of these modifications.

The plan has three levels of recommendations: one for executives, another for management, and a third one for staff.

The executive summary concentrates on your company?s strengths, weaknesses, opportunities and threats to its entirety. It includes recommendations for any needed changes in policy or governance.

The management plan is based on employee feedback and includes areas of immediate improvement as well as identification of potential problem areas. Concerns from the bottom level management can now be forwarded to the top level management in formal writing. Better working relationships may evolve from this, thereby setting the work environment for a higher productivity ratio.

Lastly, the staff report deals with topics like charting the hierarchy of the organization, and discussing in detail specific control objectives that are critical to the company?s mission. Part of our goal is to encourage personnel to pay close attentions to such changes, if any, as these efforts are essential if they want to bring about both organizational and personal success.

If you would like to further discuss how our operational review services can benefit your company, please feel free to contact us at your convenience to schedule an initial consultation. We?ll be more than happy to assist you.

More Operational Review Blogs


Carrying out an Operational Review


Operational Reviews


Operational Efficiency Initiatives


Operational Review Defined

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Using Pull Systems to Optimise Work Flows in Call Centres

When call centres emerged towards the end of the 20th century, they deserved their name ?the sweatshops of the nineties?. A new brand of low-paid workers crammed into tiny cubicles to interact with consumers who were still trying to understand the system. Supervisors followed ?scientific management? principles aimed at maximising call-agent activity. When there was sudden surge in incoming calls, systems and customer care fell over.

The flow is nowadays in the opposite direction. Systems borrowed from manufacturing like Kanban, Pull, and Levelling are in place enabling a more customer-oriented approach. In this short article, our focus is on Pull Systems. We discuss what are they, and how they can make modern call centres even better for both sets of stakeholders.

Pull Systems from a Manufacturing Perspective

Manufacturing has traditionally been push-based. Sums are done, demand predicted, raw materials ordered and the machines turned on. Manufacturers send out representatives to obtain orders and push out stock. If the sums turn out wrong inventories rise, and stock holding costs increase. The consumer is on the receiving end again and the accountant is irritable all day long.

Just-in-time thinking has evolved a pull-based approach to manufacturing. This limits inventories to anticipated demand in the time it takes to manufacture more, plus a cushion as a trigger. When the cushion is gone, demand-pull spurs the factory into action. This approach brings us closer to only making what we can sell. The consumer benefits from a lower price and the accountant smiles again.

Are Pull Systems Possible in Dual Call Centres

There are many comments in the public domain regarding the practicality of using lean pull systems to regulate call centre workflow. Critics point to the practical impossibility of limiting the number of incoming callers. They believe a call centre must answer all inbound calls within a target period, or lose its clients to the competition.

In this world-view customers are often the losers. At peak times, operators can seem keen to shrug them off with canned answers. When things are quiet, they languidly explain things to keep their occupancy levels high. But this is not the end of the discussion, because modern call centres do more than just take inbound calls.

Using the Pull System Approach in Dual Call Centres

Most call centre support-desks originally focused are handling technical queries on behalf of a number of clients. When these clients? customers called in, their staff used operator?s guides to help them answer specific queries. Financial models?determined staffing levels and the number of ?man-hours? available daily. Using a manufacturing analogy, they used a push-approach to decide the amount of effort they were going to put out, and that is where they planted their standard.

Since these early 1990 days, advanced telephony on the internet has empowered call centres to provide additional remote services in any country with these networks. They have added sales and marketing to their business models, and increased their revenue through commissions. They have control over activity levels in this part of their business. They have the power to decide how many calls they are going to make, and within reason when they are going to make them.

This dichotomy of being passive regarding incoming traffic on the one hand, and having active control over outgoing calls on the other, opens up the possibility of a partly pull-based lean approach to call centre operation. In this model, a switching mechanism moves dual trained operators between call centre duties and marketing activities, as required by the volume of call centre traffic, thus making a pull system viable in dual call centres.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?